Detalles
| Nominal Diameter | 1»- 26 mm |
| Rated Impedance | 8 Ohm |
| Nominal Power Handling 1 | 100 W |
| Program Power 2 | 250 W |
| Sensitivity 3 | 92 dB (2,83V/1m) |
| Frequency Range 4 | 2000-20000 Hz |
| Minimum Impendance | – |
| Basket Material | – |
| Magnet Material | Ferrite |
| Cone Material | Silk soft dome |
| Cone Shape | – |
| Surround | – |
| Suspension | – |
| Voice Coil Diameter | 1 in – 26 mm |
| Voice Coil Winding Material | – |
| Voice Coil Length | 1,7 mm – 0,07 in |
| Voice Coil Former Material | Aluminum |
| Connection Type | – |
| Ferrofluid | Yes |
| Magnet Gap Height | 3 mm – 0,12 in |
| Max. Peak to Peak Excursion Xlim | – |
| Efficiency Bandwidth Product EBP | 526 |
| Recommended Loading | – |
| Volume/ Tuning Frequency | |
| Maximum Recommended Frequency | – |
Notes
1 Nominal power is determined according to AES2-1984 (r2003) standard.
2 Program Power is defined as 3 dB greater than the Nominal rating.
3 Sensitivity represents the averaged value of acoustic output as measured on the forward central axis of cone, at distance 1m, when connected to 2,83V sine wave test signal.
4 Frequency range is given as the band of frequencies delineated by the lower and upper limits where the output level drops by 10 dB below the rated sensitivity in half space environment.
5 Linear Math. Xmax is calculated as (Hvc-Hg)/2 + Hg/4 where Hvc is the coil depth and Hg is the gapdepth.
6Frequency response curve is measured on IEC Baffle.
7 Impedance curve is measured in free air conditions at small signals.
Valoraciones
No hay reseñas todavía